Entry level solution for the duplication of data images to up to seven
USB memory sticks simultaneously.
This system consists of a active USB 2.0 hi-speed
with altec copy software (correct
functioning only guaranteed with supplied model of USB
requirements for using the CopyStation include
a PC with Windows XP, a free USB connector, seven available
drive letters and administrative rights for the software.
The in-house developed copy
software has the same «look & feel» as
the software for all other altec CopyStations.
The following storage media can
be used in the USB Stick CopyStation:
– USB 2.0 memory sticks
– USB 1.1 memory sticks
The USB sticks must be
less than 11 mm in width, if all seven USB slots are to be used.
There are no restrictions concerning the lengths of
the USB sticks used.
We strongly recommend that you only use USB memory sticks
from international brand manufacturers such as SanDisk,
Lexar or Transcend.
The CopyStation’s transfer
rate is more than
30 MB/sec. under ideal
conditions. For example, copying of seven USB
sticks with 512 MB each takes less
than 2 minutes (speed
depends on USB stick type and USB connection).
Three different copying methods are
available for copying the data – copying of entire
data images, copying of short images and the so-called
file copying method.
For more information see «Copying
the «Software» tab.
For the three software options please refer to the «Software»
This copying system benefits from the know-how and
experience resulting from seven
years of CopyStation development at
– Ideal for small scale duplication of USB sticks
– Mobile solution, easy to transport
– Choice between a standard and two optional copy methods
– Unique software option for customization
of USB sticks
Available versions (with item number)
USB Stick CopyStation – B31AL181
Software Short Image Files – 31AL1812
Software interface for e.g. external serialization – 31AL1814
Software File Copy – 31AL1817