3.5" Fibre Channel Solid State Drive with 80 GB max. capacity and read/write performance up to 55/72 MB/sec   STEC Zeus Solid State Drive



Downloads & Links

Data sheet (PDF – R2341, 01/07 – 620 KB)

Manual and installation guide for downloading

Product pictures for downloading

The Zeus 3.5" Fibre Channel Solid State Drive is a 9.5 mm low profile solution with a sustained read/write performance up to 55/72 MB/sec and capacities up to 80 GB.

3.5" Drive with 40-pin SCA-2 interface (hot-plugging).

Completely solid state – no moving parts.

Available in capacities ranging from 10 to 80 GB using SLC (Single Level Cell) NAND Flash.

Up to 55/72 MByte/sec sustained read/write performance.

5 volt ±5 %; low power operation.

Environmental Specifications:

For the following temperature ranges (operating) available:
Commercial (0°C to +70°C)
Industrial (–40°C to +85°C)

Storage temperature (non-operating) from –55°C to +95°C.

Humidity 5 to 95 %, non condensing.

Altitude 80.000 ft.

Shock 1500 G (operating); Vibration 16.3 G random (operating) – both MIL-STD-810F.


Powerful EDC (Error Detection) and ECC (Error Correction), wear-leveling and bad block mapping algorithms for exceptional data reliability.

10 year data integrity.

5 year product warranty.


Four different Purge Features (Security Erase).

Conformal Coating to protect the drive against moisture.

  Available versions (with item number)

RoHS compliant

10 GB Zeus 3.5" Fibre Channel – 55/72 MB/s
altec Item no.: B66MT6A10
STEC Item no.: Z10F310CU

40 GB Zeus 3.5" Fibre Channel – 55/72 MB/s
altec Item no.: B66MT6A40
STEC Item no.: Z10F340CU

80 GB Zeus 3.5" Fibre Channel – 55/72 MB/s
altec Item no.: B66MT6A80
STEC Item no.: Z10F380CU

Versions available for an extended industrial temperature range: –40°C to 85°C (operating).
altec Item no.: B66MT6AxxI
STEC Item no.: Z10F3xxCUI

Other memory capacities and/or sustained read/write rates as shown above are available as an option. Please ask for further details.

What are Solid State Disks?

The common feature of all Solid State Disks is that the data is stored on Flash chips. Solid State Disks are insensitive to shock, vibration, temperature effects and extreme air pressure changes and are highly resistant to EMC and ESD.

Solid State Disks do not have sensitive rotating components. They are totally silent in operation and have a low current consumption.

You can write, read and delete the data just like a conventional hard disk. Mechanical hard disks in mobile systems and industrial computers can be replaced by pin-compatible Solid State Disks.



Top | |

© 2006-2007 altec ComputerSysteme GmbH