2.5" SCSI Solid State Drive  

 

 

Downloads & Links

Data sheet (PDF, v.1.0 – 139 KB)


Manual and installation guide for downloading

Product pictures for downloading


Homepage Memtech SSD Corporation
       
The SC2500 series from Memtech is a new line of 100% compatible SCSI solid state drives offered in a standard 2.5-inch drive format.

The SC2500 employs sector erasable NAND E2PROMs (Flash) to deliver up to 9 GBytes of uncompressed, non-volatile solid state storage in an extremely small, rugged form factor.

Low profile 2.5" drive form-factor with 50-pin, 2 mm SCSI-II interface.

Up to 9 GByte uncompressed capacity.

For the following temperature ranges (operating) available:
Commercial (0°C to +70°C)
Extended (–20°C to +75°C)
Industrial (–40°C to +85°C)

Storage temperature (non-operating) from –55°C to +125°C.

Completely solid state – no moving parts.

Active Remap™ for exceptional data reliability.

5 volt, low power operation.

1000 G operating shock; 15 G operating vibration.

0.3 millisecond random access time.

1.5 MByte/sec sustained read throughput; 700 KByte/sec sustained write throughput.

256 KByte SRAM buffer.

10 year data integrity.

8 year product warranty.

Pending CE and CSA/UL compliant.

Exclusive distributor for Germany, Austria and Switzerland is altec ComputerSysteme GmbH.

 

Available versions (with item number)

512 MB SC2500 Stinger – 52MT512

1024 MB SC2500 Stinger – 52MT10

2048 MB SC2500 Stinger – 52MT20

4096 MB SC2500 Stinger – 52MT40

8192 MB SC2500 Stinger – 52MT81

9216 MB SC2500 Stinger – 52MT92

Other memory capacities as shown above are also available. Please ask for further details.

 

What are Solid State Disks?

The common feature of all Solid State Disks is that the data is stored on Flash chips. Solid State Disks are insensitive to shock, vibration, temperature effects and extreme air pressure changes and are highly resistant to EMC and ESD.

Solid State Disks do not have sensitive rotating components. They are totally silent in operation and have a low current consumption.

You can write, read and delete the data just like a conventional hard disk. Mechanical hard disks in mobile systems and industrial computers can be replaced by pin-compatible Solid State Disks.

 

Memtech Solid State Disks

A Wear-Leveling Algorithm is implemented in all drives, as well as the Kicker™ Hold Up Circuit intended to prevent drive destruction if writing is suddenly interrupted.

Every drive is subjected to Memtech’s exacting EnduroTest™ in which each drive is fully tested under environmental and voltage extremes to guarantee data integrity under even the harshest conditions.

Optionally, all products are available with a Security Erase feature and with a Conformal Coating to protect them against moisture.

 
         

Top | |

© 2004-2007 altec ComputerSysteme GmbH