3.5" SCSI Solid State Drive   Memtech SC35 Mastodon



Downloads & Links

Data sheet (PDF, v.4.4 – 98 KB)

Manual and installation guide for downloading

Product pictures for downloading

Homepage Memtech SSD Corporation
The SC35 from Memtech is a modular, high performance solid state drive in a 3.5 inch half-height drive format, designed for implementation on systems conforming to the SCSI-II standard.

It is composed of a large array of 128, 256 or 512 Mbit NAND E2PROM memories that through on board processor control, can emulate the storage and retrieval operations of a hard disk, but with faster access and throughput.

3.5" drive form-factor with Single-ended 50 pin SCSI-II interface.

20 GB uncompressed capacity.

For the following temperature ranges (operating) available:
Commercial (0°C to +70°C)
Extended (–20°C to +75°C)
Industrial (–40°C to +85°C)

Completely solid state – no moving parts.

Active Remap™ for exceptional data reliability.

5 volt, low power operation.

500 G operating shock; 10 G operating vibration.

1.0 millisecond random access time.

1.5 MByte/sec sustained read throughput; 650 KByte/sec sustained write throughput.

10 year data integrity.

Exclusive distributor for Germany, Austria and Switzerland is altec ComputerSysteme GmbH.


Available versions (with item number)

512 MB SC35 Mastodon – 56MT512

1024 MB SC35 Mastodon – 56MT10

2048 MB SC35 Mastodon – 56MT20

4096 MB SC35 Mastodon – 56MT40

8192 MB SC35 Mastodon – 56MT81

16384 MB SC35 Mastodon – 56MT163

Other memory capacities as shown above are also available. Please ask for further details.


What are Solid State Disks?

The common feature of all Solid State Disks is that the data is stored on Flash chips. Solid State Disks are insensitive to shock, vibration, temperature effects and extreme air pressure changes and are highly resistant to EMC and ESD.

Solid State Disks do not have sensitive rotating components. They are totally silent in operation and have a low current consumption.

You can write, read and delete the data just like a conventional hard disk. Mechanical hard disks in mobile systems and industrial computers can be replaced by pin-compatible Solid State Disks.


Memtech Solid State Disks

A Wear-Leveling Algorithm is implemented in all drives.

Every drive is subjected to Memtech’s exacting EnduroTest™ in which each drive is fully tested under environmental and voltage extremes to guarantee data integrity under even the harshest conditions.

Optionally, all products are available with a Security Erase feature and with a Conformal Coating to protect them against moisture.


Top | |

© 2004-2007 altec ComputerSysteme GmbH