2.5" IDE Solid State Drive   AT2525 Booster Rocket



Downloads & Links

Data sheet (PDF, v.1.3 – 230 KB)

Manual and installation guide for downloading

Product pictures for downloading

Homepage Memtech SSD Corporation
The AT2525 is the fastest of the Rocket Family drives available today. With a maximum capacity of 3 GByte and exceptional speed, the AT2525 is a cost effective solution in an extremely compact low profile 2.5" form-factor.

It employs sector erasable NAND EEPROMs (Flash Memory) to deliver up to 3 GBytes of uncompressed, nonvolatile solid state storage in an extremely small, rugged form-factor.

Low profile 2.5" drive form-factor with 44-pin, 2 mm grid IDE interface. Up to PIO Mode 4 support.

64 MByte to 3 GByte uncompressed capacity.

For the following temperature ranges (operating) available:
Commercial (0°C to +70°C)
Extended (–20°C to +75°C)
Industrial (–40°C to +85°C)

Storage temperature (non-operating) from –65°C to +135°C.

Completely solid state – no moving parts.

An integrated 72-bit Reed-Solomon error detection and correction, proprietary re-mapping and wear-leveling technology, and power hold-up circuit greatly improve data reliability.

5 volt, low power operation.

1000 G operating shock; 15 G operating vibration.

Sustained sequential read throughput is 5.4 MBytes/sec and 5.1 MBytes/sec for writes.

Random read throughput is 4.0 MBytes/sec and 5.6 MBytes/sec for writes.

10 year data integrity.

Pending CE and CSA/UL compliant.

Exclusive distributor for Germany, Austria and Switzerland is altec ComputerSysteme GmbH.

  EOL – Not available for order.

Versions (with item number)

256 MB AT2525 Booster Rocket – 33MT256

512 MB AT2525 Booster Rocket – 33MT512

1024 MB AT2525 Booster Rocket – 33MT10

2048 MB AT2525 Booster Rocket – 33MT20

3072 MB AT2525 Booster Rocket – 33MT30

Other memory capacities as shown above are also available. Please ask for further details.


What are Solid State Disks?

The common feature of all Solid State Disks is that the data is stored on Flash chips. Solid State Disks are insensitive to shock, vibration, temperature effects and extreme air pressure changes and are highly resistant to EMC and ESD.

Solid State Disks do not have sensitive rotating components. They are totally silent in operation and have a low current consumption.

You can write, read and delete the data just like a conventional hard disk. Mechanical hard disks in mobile systems and industrial computers can be replaced by pin-compatible Solid State Disks.


Memtech Solid State Disks

A Wear-Leveling Algorithm is implemented in all drives, as well as the Kicker™ Hold Up Circuit intended to prevent drive destruction if writing is suddenly interrupted.

Every drive is subjected to Memtech’s exacting EnduroTest™ in which each drive is fully tested under environmental and voltage extremes to guarantee data integrity under even the harshest conditions.

Optionally, all products are available with a Security Erase feature and with a Conformal Coating to protect them against moisture.


Top | |

© 2004-2006 altec ComputerSysteme GmbH