2.5" IDE Solid State Drive   AT2560 Hornet

 

 

Downloads & Links

Data sheet (PDF, v.1.0 – 227 KB)


Manual and installation guide for downloading

Product pictures for downloading


Homepage Memtech SSD Corporation
       
The AT2560 is the fastest sustained sequential drive available today.

With a maximum capacity of 16 Gbyte and exceptional speed, the AT2560 is a cost effective solution in an extremely compact low profile 2.5" form-factor.

2.5" drive with 44-pin, 2 mm IDE interface. PIO Mode-4 and DMA Mode-2 support.

512 MByte to 16 GByte uncompressed capacity.

For the following temperature ranges (operating) available:
Commercial (0°C to +70°C)
Extended (–20°C to +75°C)
Industrial (–40°C to +85°C)

Storage temperature range (non-operating) –65°C to +135°C.

Completely solid state – no moving parts.

72-bit ECC, proprietary re-mapping and wear-leveling technology for exceptional data reliability.

5 volt, low power operation.

1000 G operating shock; 15 G operating vibration.

Sustained sequential read throughput is 14 MBytes/sec and 12 MBytes/sec for writes.

10 year data integrity.

Pending CE and CSA/UL compliant.

Exclusive distributor for Germany, Austria and Switzerland is altec ComputerSysteme GmbH.

  EOL – Not available for order.

Versions (with item number)

512 MB AT2560 Hornet – 46MT512

1024 MB AT2560 Hornet – 46MT10

2048 MB AT2560 Hornet – 46MT20

4096 MB AT2560 Hornet – 46MT40

8192 MB AT2560 Hornet – 46MT81

12288 MB AT2560 Hornet – 46MT122

16384 MB AT2560 Hornet – 46MT163

Other memory capacities as shown above are also available. Please ask for further details.

 

What are Solid State Disks?

The common feature of all Solid State Disks is that the data is stored on Flash chips. Solid State Disks are insensitive to shock, vibration, temperature effects and extreme air pressure changes and are highly resistant to EMC and ESD.

Solid State Disks do not have sensitive rotating components. They are totally silent in operation and have a low current consumption.

You can write, read and delete the data just like a conventional hard disk. Mechanical hard disks in mobile systems and industrial computers can be replaced by pin-compatible Solid State Disks.

 

Memtech Solid State Disks

A Wear-Leveling Algorithm is implemented in all drives, as well as the Kicker™ Hold Up Circuit intended to prevent drive destruction if writing is suddenly interrupted.

Every drive is subjected to Memtech’s exacting EnduroTest™ in which each drive is fully tested under environmental and voltage extremes to guarantee data integrity under even the harshest conditions.

Optionally, all products are available with a Security Erase feature and with a Conformal Coating to protect them against moisture.

 
         

Top | |

© 2005-2006 altec ComputerSysteme GmbH