2.5" IDE UDMA-66 Solid State Drive with 64 GB max. capacity and read/write performance up to 40 MB/sec   AT2580 Panther



Downloads & Links

Data sheet (PDF, v.1.1 – 286 KB)

Manual and installation guide for downloading

Product pictures for downloading

Homepage Memtech SSD Corporation
The AT2580 Panther solid-state flash drive is a UDMA-66 compliant IDE memory module offered in an extremely low profile 2.5 inch drive form-factor with read/write performance up to 40 MB/sec.

2.5" Drive with 44-pin IDE UDMA-66 interface and 2 mm grid. ATA-5 compliant, PIO Mode 0-4 and UDMA Mode 0-4 Support.

Available in standard capacities ranging from 4 to 64 GB, all in the same, 9.5 mm low profile solution using SLC (Single Level Cell) NAND Flash.

For the following temperature ranges (operating) available:
Commercial (0°C to +70°C)
Extended (–20°C to +75°C)
Industrial (–40°C to +85°C)

Storage temperature (non-operating) from –55°C to +125°C.

Completely solid state – no moving parts.

Powerful ECC (32 Bit Reed-Solomon) and proprietary wear leveling for exceptional data reliability.

SMART (Self-Monitoring, Analysis and Reporting Technology) compliant.

5 volt, low power operation.

Shock 1500 G (operating); Vibration 16,3 G random (operating).

Up to 40 MByte/sec sustained Read/Write performance; 20 MByte/sec (AT2582 Panther), 30 MByte/sec (AT2583 Panther), 40 MByte/sec (AT2584 Panther).

Erase/Write endurance 8 million cycles.

10 year data integrity.

7 year product warranty.

Exclusive distributor for Germany, Austria and Switzerland is altec ComputerSysteme GmbH.

  EOL – Not available for order.

Versions (with item number)

4096 MB AT2582 Panther – 20 MB/s – 10MT40

8192 MB AT2582 Panther – 20 MB/s – 10MT81

16384 MB AT2582 Panther – 20 MB/s – 10MT163

32768 MB AT2582 Panther – 20 MB/s – 10MT327

65536 MB AT2582 Panther – 20 MB/s – 10MT655

6144 MB AT2583 Panther – 30 MB/s – 11MT61

12288 MB AT2583 Panther – 30 MB/s – 11MT122

24576 MB AT2583 Panther – 30 MB/s – 11MT245

8192 MB AT2584 Panther – 40 MB/s – 12MT81

16384 MB AT2584 Panther – 40 MB/s – 12MT163

Other memory capacities as shown above are also available. Please ask for further details.


What are Solid State Disks?

The common feature of all Solid State Disks is that the data is stored on Flash chips. Solid State Disks are insensitive to shock, vibration, temperature effects and extreme air pressure changes and are highly resistant to EMC and ESD.

Solid State Disks do not have sensitive rotating components. They are totally silent in operation and have a low current consumption.

You can write, read and delete the data just like a conventional hard disk. Mechanical hard disks in mobile systems and industrial computers can be replaced by pin-compatible Solid State Disks.


Memtech Solid State Disks

A Wear-Leveling Algorithm is implemented in all drives, as well as the Kicker™ Hold Up Circuit intended to prevent drive destruction if writing is suddenly interrupted.

Every drive is subjected to Memtech’s exacting EnduroTest™ in which each drive is fully tested under environmental and voltage extremes to guarantee data integrity under even the harshest conditions.

Optionally, all products are available with a Security Erase feature and with a Conformal Coating to protect them against moisture.


Top | |

© 2005-2006 altec ComputerSysteme GmbH