3.5" SATA & USB Solid State Drive with 96 GB max. capacity and read/write performance up to 60 MB/sec  



Downloads & Links

Data sheet (PDF, v.1.2 – 146 KB)

Manual and installation guide for downloading

Product pictures for downloading

Homepage Memtech SSD Corporation
The SU3580 Panther series of solid-state flash drives are a 1.5Gbit Serial ATA and USB 2.0 HiSpeed compliant memory module offered in an extremely low profile 3.5 inch drive form-factor with read/write performance up to 60 MB/sec.

3.5" Drive with 1.5 GBit SATA interface (7-pin signal segment, 15-pin power segment) and USB 2.0 HiSpeed interface (5-pin mini USB signal). ATA/ATAPI-7 compliant, SATA 1.0, USB 2.0 HiSpeed.

Available in standard capacities ranging from 10 to 96 GB, all in the same, 9.5 mm low profile solution using SLC (Single Level Cell) NAND Flash.

For the following temperature ranges (operating) available:
Commercial (0°C to +70°C)
Extended (–20°C to +75°C)
Industrial (–40°C to +85°C)

Storage temperature (non-operating) from –55°C to +125°C.

Completely solid state – no moving parts.

Powerful ECC (32 Bit Reed-Solomon) and proprietary wear leveling for exceptional data reliability.

SMART (Self-Monitoring, Analysis and Reporting Technology) compliant.

5 volt, low power operation.

Shock 1500 G (operating); Vibration 16,3 G random (operating).

Up to 60 MByte/sec sustained Read/Write performance at SATA interface; 50 MByte/sec (SU3585 Panther), 60 MByte/sec (SU3586 Panther). At USB 2.0 interface sustained Read/Write performance of more than 20 MByte/sec (sustained).

Erase/Write endurance 8 million cycles.

10 year data integrity.

7 year product warranty.

Exclusive distributor for Germany, Austria and Switzerland is altec ComputerSysteme GmbH.

  EOL – Not available for order.

Versions (with item number)

10240 MB SU3585 Panther – 50 MB/s – 25MT102

20480 MB SU3585 Panther – 50 MB/s – 25MT204

30720 MB SU3585 Panther – 50 MB/s – 25MT307

40960 MB SU3585 Panther – 50 MB/s – 25MT409

81920 MB SU3585 Panther – 50 MB/s – 25MT819

12288 MB SU3586 Panther – 60 MB/s – 26MT122

24576 MB SU3586 Panther – 60 MB/s – 26MT245

36864 MB SU3586 Panther – 60 MB/s – 26MT368

49152 MB SU3586 Panther – 60 MB/s – 26MT491

98304 MB SU3586 Panther – 60 MB/s – 26MT983

Other memory capacities as shown above are also available. Please ask for further details.


What are Solid State Disks?

The common feature of all Solid State Disks is that the data is stored on Flash chips. Solid State Disks are insensitive to shock, vibration, temperature effects and extreme air pressure changes and are highly resistant to EMC and ESD.

Solid State Disks do not have sensitive rotating components. They are totally silent in operation and have a low current consumption.

You can write, read and delete the data just like a conventional hard disk. Mechanical hard disks in mobile systems and industrial computers can be replaced by pin-compatible Solid State Disks.


Memtech Solid State Disks

A Wear-Leveling Algorithm is implemented in all drives, as well as the Kicker™ Hold Up Circuit intended to prevent drive destruction if writing is suddenly interrupted.

Every drive is subjected to Memtech’s exacting EnduroTest™ in which each drive is fully tested under environmental and voltage extremes to guarantee data integrity under even the harshest conditions.

Optionally, all products are available with a Security Erase feature and with a Conformal Coating to protect them against moisture.


Top | |

© 2005-2006 altec ComputerSysteme GmbH