2.5" IDE UDMA-66 Solid State Drive with 64 GB max. capacity and read/write performance up to 40 MB/sec   STEC Zeus Solid State Drive

 

 

Downloads & Links

Data sheet (PDF – R2340, 04/07 – 253 KB)


Manual and installation guide for downloading

Product pictures for downloading

       
The Zeus 2.5" PATA Solid State Drive is a 9.5 mm low profile solution with a sustained read/write performance up to 40/26 MB/sec and capacities up to 64 GB.

2.5" Drive with 44-pin IDE UDMA-66 interface and 2 mm grid. ATA-5 compliant, PIO Mode 0-4 and UDMA Mode 0-4 Support.

Completely solid state – no moving parts.

Available in capacities ranging from 8 to 64 GB using SLC (Single Level Cell) NAND Flash.

Up to 40/26 MByte/sec sustained read/write performance.

5 volt ±5 %; low power operation.

Environmental Specifications:

For the following temperature ranges (operating) available:
Commercial (0°C to +70°C)
Industrial (–40°C to +85°C)

Storage temperature (non-operating) from –55°C to +95°C.

Humidity 5 to 95 %, non condensing.

Altitude 80.000 ft.

Shock 1500 G (operating); Vibration 16.3 G random (operating) – both MIL-STD-810F.

Endurance:

Powerful EDC (Error Detection) and ECC (Error Correction), wear-leveling and bad block mapping algorithms for exceptional data reliability.

10 year data integrity.

5 year product warranty.

Optional:

Four different Purge Features (Security Erase).

Conformal Coating to protect the drive against moisture.

  EOL – Not available for order.

Versions (with item number)

RoHS compliant

8 GB Zeus 2.5" PATA – 40/26 MB/s
altec Item no.: B60MT4A8
STEC Item no.: Z4A28CU

16 GB Zeus 2.5" PATA – 40/26 MB/s
altec Item no.: B60MT4A16
STEC Item no.: Z4A216CU

32 GB Zeus 2.5" PATA – 40/26 MB/s
altec Item no.: B60MT4A32
STEC Item no.: Z4A232CU

64 GB Zeus 2.5" PATA – 40/26 MB/s
altec Item no.: B60MT4A64
STEC Item no.: Z4A264CU

Versions available for an extended industrial temperature range: –40°C to 85°C (operating).
altec Item no.: B60MT4AxxI
STEC Item no.: Z4A2xxCUI

Other memory capacities and/or sustained read/write rates as shown above are also available. Please ask for further details.
 

What are Solid State Disks?

The common feature of all Solid State Disks is that the data is stored on Flash chips. Solid State Disks are insensitive to shock, vibration, temperature effects and extreme air pressure changes and are highly resistant to EMC and ESD.

Solid State Disks do not have sensitive rotating components. They are totally silent in operation and have a low current consumption.

You can write, read and delete the data just like a conventional hard disk. Mechanical hard disks in mobile systems and industrial computers can be replaced by pin-compatible Solid State Disks.

 

 
         

Top | |

© 2006-2007 altec ComputerSysteme GmbH