2.5" SATA Solid State Drive with 128 GB max. capacity and read/write performance up to 55 MB/sec   STEC Zeus Solid State Drive

 

 

Downloads & Links

Data sheet (PDF – R2340, 04/07 – 253 KB)


Manual and installation guide for downloading

Product pictures for downloading

       
The Zeus 2.5" SATA Solid State Drive is a 9.5 mm low profile (for capacities up to 64 GB) solution with a sustained read/write performance up to 55 MB/sec and capacities up to 128 GB.

2.5" Drive with 1.5 GBit SATA interface. Serial ATA 1.0a compliant.

Completely solid state – no moving parts.

Available in capacities ranging from 8 to 128 GB using SLC (Single Level Cell) NAND Flash.

Up to 55 MByte/sec sustained read/write performance.

5 volt ±5 %; low power operation.

Environmental Specifications:

For the following temperature ranges (operating) available:
Commercial (0°C to +70°C)
Industrial (–40°C to +85°C)

Storage temperature (non-operating) from –55°C to +95°C.

Humidity 5 to 95 %, non condensing.

Altitude 80.000 ft.

Shock 1500 G (operating); Vibration 16.3 G random (operating) – both MIL-STD-810F.

Endurance:

Powerful EDC (Error Detection) and ECC (Error Correction), wear-leveling and bad block mapping algorithms for exceptional data reliability.

10 year data integrity.

5 year product warranty.

Optional:

Four different Purge Features (Security Erase).

Conformal Coating to protect the drive against moisture.

  EOL – Not available for order.

Versions (with item number)

RoHS compliant

8 GB Zeus 2.5" SATA – 40/26 MB/s
altec Item no.: B61MT4A8
STEC Item no.: Z4S28CU

12 GB Zeus 2.5" SATA – 50/40 MB/s
altec Item no.: B61MT6A12
STEC Item no.: Z6S212CU

16 GB Zeus 2.5" SATA – 40/26 MB/s
altec Item no.: B61MT4A16
STEC Item no.: Z4S216CU

24 GB Zeus 2.5" SATA – 50/40 MB/s
altec Item no.: B61MT6A24
STEC Item no.: Z6S224CU

32 GB Zeus 2.5" SATA – 40/26 MB/s
altec Item no.: B61MT4A32
STEC Item no.: Z4S232CU

48 GB Zeus 2.5" SATA – 50/40 MB/s
altec Item no.: B61MT6A48
STEC Item no.: Z6S248CU

64 GB Zeus 2.5" SATA – 40/26 MB/s
altec Item no.: B61MT4A64
STEC Item no.: Z4S264CU

96 GB Zeus 2.5" SATA – 55 MB/s
altec Item no.: B61MT8A96
STEC Item no.: Z8S296CU

128 GB Zeus 2.5" SATA – 55 MB/s
altec Item no.: B61MT8A128
STEC Item no.: Z8S2128CU

Versions available for an extended industrial temperature range: –40°C to 85°C (operating).
altec Item no.: B61MTxAxxI
STEC Item no.: ZxS2xxCUI

Other memory capacities and/or sustained read/write rates as shown above are also available. Please ask for further details.
 

What are Solid State Disks?

The common feature of all Solid State Disks is that the data is stored on Flash chips. Solid State Disks are insensitive to shock, vibration, temperature effects and extreme air pressure changes and are highly resistant to EMC and ESD.

Solid State Disks do not have sensitive rotating components. They are totally silent in operation and have a low current consumption.

You can write, read and delete the data just like a conventional hard disk. Mechanical hard disks in mobile systems and industrial computers can be replaced by pin-compatible Solid State Disks.

 

 
         

Top | |

© 2006-2007 altec ComputerSysteme GmbH