Flash Profiler
USB Sticks




acon Delta USB 3.0 Drive T/TX541

The Delta Disk is super speed USB 3.1 gen 1 removable flash disk drive with USB 3.1 gen 1 connection (backward compatible with USB 2.0/1.1) and supports various storage capacities.
Delta Disk is compatible with all USB specification (USB 1.1 / USB 2.0 / USB 3.0/ USB 3.1). Delta Disk is a plug and play device, simply plug it into any USB port and it will automatically get detected by the computer. Now you can read, write, copy, delete and move data from your hard disk drive to Delta Disk or from Delta Disk to your hard disk drive with the super speed of USB 3.0.

Model No.
T/TX541
Interface
USB 3.0
Capacity
16GB - 256GB
Flash Type
3D TLC
Endurance
3.000 P/E Cycles
Standard Temperature
0°C +70°C
Extended Temperature
--
Performance
SR: 125MB/s | SW: 40MB/s
DRAM
No

acon Metal USB 3.0 Drive T/TX551

The Metal Disk is super speed USB 3.1 gen 1 removable flash disk drive with USB 3.1 gen 1 connection (backward compatible with USB 2.0/1.1) and supports various storage capacities.
Metal Disk is compatible with all USB specification (USB 1.1 / USB 2.0 / USB 3.0/ USB 3.1). Metal Disk is a plug and play device, simply plug it into any USB port and it will automatically get detected by the computer. Now you can read, write, copy, delete and move data from your hard disk drive to Metal Disk or from Metal Disk to your hard disk drive with the super speed of USB 3.0.

Model No.
T/TX551
Interface
USB 3.0
Capacity
32GB - 256GB
Flash Type
3D TLC
Endurance
3.000 P/E Cycles
Standard Temperature
0°C +70°C
Extended Temperature
-40°C +85°C
Performance
SR: 125MB/s | SW: 40MB/s
DRAM
No

Apacer USB 3.0 Drive UV110-UFD1

Apacer’s UV110-UFD1 utilizes 3D NAND for higher capacity up to 512GB and provides more power efficiency than 2D NAND, with the aim of replacing a conventional IDE hard disk drive. With exquisite size and robust metal housing, UV110-UFD1 prevents mechanical interference and enhances environment and ESD protection.
UV110-UFD1 is a new generation USB flash drive compatible with the latest USB specification – USB 3.2 Gen1 (SuperSpeed), with a maximum transfer rate of 5.0 Gbps. The connector is backward compatible with USB 2.0 and USB 1.1 interfaces. With compliance with USB 3.2 specification, this USB drive can deliver up to 275 MB/s outstanding performance.
Reliability wise, UV110-UFD1 is implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability while reading raw data inside a flash chip. In addition, the drive comes with various implementations including powerful hardware ECC engine, Wear Leveling, flash block management, S.M.A.R.T., Page Mapping,etc.. This product is well suited for portable flash storage applications while operating at minimal power consumption.

Model No.
UV110-UFD1
Interface
USB 3.0
Capacity
128GB - 512GB
Flash Type
3D TLC
Endurance
3.000 P/E Cycles
Standard Temperature
0°C +70°C
Extended Temperature
-40°C +85°C
Performance
SR: 275MB/s | SW: 195MB/s
DRAM
No

Apacer USB 3.0 Drive UT110-UFD2

Apacer’s UT110-UFD2 is a new generation USB flash drive compatible with the USB 3.2 Gen1 Super Speed, with a maximum transfer rate of 5 Gb/s designed to replace a conventional IDE hard disk drive. The connector is backward compatible with USB 2.0 and USB 1.1 interfaces. With compliance with USB 3.2 specification, this USB drive can deliver up to 270 MB/s outstanding performance.

Utilizing 3D NAND and providing more power efficiency than 2D NAND, UT110-UFD2 is not only implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability, but also built with the highest durability and ruggedness with a special Chip-On-Board (COB) packaging technology, which allows your precious files to be safely stored and protected against dust, water and shock at all times.

In terms of flash management, UT110-UFD2 adopts the latest page mapping file translation layer and comes with various implementations including powerful hardware ECC engine, wear leveling, flash block management, S.M.A.R.T., power failure management, Hyper Cache technology and SMART Read Refresh™. This product is well suited for embedded flash storage applications offering new and expanded functionality as well as more cost-effective design, better performance and increased reliability.

Model No.
UT110-UFD2
Interface
USB 3.0
Capacity
64GB
Flash Type
3D TLC
Endurance
3.000 P/E Cycles
Standard Temperatur
0°C +70°C
Extended Temperature
--
Performance
SR: 270MB/s | SW: 85MB/s
DRAM
No


Diese Webseite verwendet Cookies. Mit der Nutzung unserer Dienste erklären Sie sich damit einverstanden, dass wir Cookies verwenden: Weitere Informationen