Flash Profiler




Acon AZ115 Industrial M.2 2242 SATA III SSD

acon Industrial M.2 2242 SSD is a new SSD module designed for embedded systems applied for industrial platforms. acon industrial 2242 SSD offers a universal temperature range for operation, 0°C - 70°C and -40°C - 85°C and a capacity up to 256GB.

Model Nr.
AZ115 Industrial M.2
Form Factor
M.2 2242 SATA III
Kapazität
2GB - 256GB
Flash Typ
pSLC
MTBF (Std.)
>2 Mio
Standard Temperatur
0C bis +70C
Erweiterte Temperatur
-40C bis +85C
Lesegeschwindigkeit
560MB/s
Schreibgeschwindigkeit
465MB/s

Acon AZ115 Seal M.2 2242 SATA III SSD

acon Seal M.2 2242 SSD is a new SSD module designed for embedded systems within rough Environments. The acon M.2 Module will be fully coated with a special sealing compound, which hermetically seals the sensitive electronic components within and protects your data reliably against liquids, dust, dirt, shock and vibration.

Model Nr.
AZ115 Seal M.2
Form Factor
M.2 2242 SATA III
Kapazität
2GB - 256GB
Flash Typ
pSLC
MTBF (Std.)
>2 Mio
Standard Temperatur
-
Erweiterte Temperatur
-40C bis +85C
Lesegeschwindigkeit
560MB/s
Schreibgeschwindigkeit
465MB/s
Coating
elektronisches Gießharz

Innodisk M.2 2242 3IE3

Innodisk M.2 (S42) 3IE3 effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Model Nr.
M.2 2242 3IE3
Form Factor
M.2 SATA III 6.0 Gb/s
Kapazität
8GB~64GB
Flash Typ
iSLC
MTBF (Std.)
>3 million hours
Standard Temperatur
0C bis +70C
Erweiterte Temperatur
-40C bis +85C
Lesegeschwindigkeit
200 MB/s
Schreibgeschwindigkeit
80 MB/s

Virtium Storfly M.2 SATA SSD iMLC

StorFly® M.2 SATA delivers an optimal solid-state storage solution for embedded and industrial systems that require high performance in a small form factor.
M.2 requires less power and generates less heat, which improves the devices’ reliability in systems where space is limited and airflow minimal, if not absent entirely. This provides system designers with the capability to scale their capacity by allowing integration of multiple SSDs all within a limited power budget or system footprint.

Model Nr.
XE
Form Factor
M.2 2242 SATA III
Kapazität
16GB-480GB
Flash Typ
iMLC
MTBF (Std.)
200 TSD
Standard Temperatur
0C bis +70C
Erweiterte Temperatur
-40C bis +85C
Lesegeschwindigkeit
520MB/s
Schreibgeschwindigkeit
300MB/s


Diese Webseite verwendet Cookies. Mit der Nutzung unserer Dienste erklären Sie sich damit einverstanden, dass wir Cookies verwenden: Weitere Informationen