Flash Profiler
mSATA SSD




acon mSATA SATA III SSD T/TX410

acon’s mSATA delivers all the advantages of flash disk technology with the Serial ATA I/II/III interface and is fully compliant with the standard mSATA form factor, known as JEDEC MO-300 standard.
The module is designed to operate at a maximum operating frequency of 200MHz with 30MHz external crystal. Its capacity could provide a wide range up to 1TB. Moreover, it can reach up to 550MB/s read as well as 500MB/s write high performance based on Toggle 2.0 TLC flash (with 32MB SDR enabled and measured by CrystalDiskMark v5.0). Meanwhile, the power consumption of the mSATA module is much lower than traditional hard drives, making it the best embedded solution for new platforms.

Model No.
T/TX410
Interface
SATA III 6.0 Gb/s
Capacity
16GB - 128GB
Flash Type
3D pSLC
Endurance
30.000 P/E Cycles
Standard Temperature

0°C - +70°C
Extended Temperature
40°C - +85°C
Performance
SR: 550MB/s | SW: 495MB/s
DRAM
No

Apacer mSATA SATA III SSD SH250-300

Apacer’s SH250-300 is a well-balanced solid-state disk (SSD) drive with standard form factor and great performance. Designed in SATA 6.0 Gbps interface, the SSD is able to deliver exceptional read/write speed, making it the ideal companion for heavy-loading industrial or server operations.

SH250-300 utilizes 3D NAND for higher capacity up to 160GB and provides more power efficiency than 2D NAND. Appearing in SH250-300 mechanical dimensions, SH250-300 is believed to be the leading add-in storage solution for future host computing systems. Regarding reliability, SH250-300 is implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability. With Apacer’s SLC-liteX technology, SH250-300 performs with higher number of P/E cycles up to 30,000 times. Since it is operating under SATA 6.0 Gbps interface, SH250-300 is provided with Apacer latest S.M.A.R.T. that is primarily oriented for the latest SATA interface SSD, for drive lifetime monitoring and analysis. In addition, the drive comes with various implementations including powerful hardware ECC engine, power saving modes, wear leveling, flash block management, TRIM and DataDefender™.

Model No.
SH250-300
Interface
SATA III 6.0 Gb/s
Capacity
10GB - 160GB
Flash Type
3D pSLC
Endurance
30.000 P/E Cycles
Standard Temperature
0°C - +70°C
Extended Temperature
-40°C - +85°C
Performance
SR: 560MB/s | SW: 520MB/s
DRAM
No

Model Nr.
Interface
Kapazität
Flash Typ
MTBF (Std.)
Standard Temperatur
Erweiterte Temperatur
Lesegeschwindigkeit
Schreibgeschwindigkeit

Model Nr.
Interface
Kapazität
Flash Typ
MTBF (Std.)
Standard Temperatur
Erweiterte Temperatur
Lesegeschwindigkeit
Schreibgeschwindigkeit

Model Nr.
Interface
Kapazität
Flash Typ
MTBF (Std.)
Standard Temperatur
Erweiterte Temperatur
Lesegeschwindigkeit
Schreibgeschwindigkeit

Model Nr.
Interface
Kapazität
Flash Typ
MTBF (Std.)
Standard Temperatur
Erweiterte Temperatur
Lesegeschwindigkeit
Schreibgeschwindigkeit

Model Nr.
Interface
Kapazität
Flash Typ
MTBF (Std.)
Standard Temperatur
Erweiterte Temperatur
Lesegeschwindigkeit
Schreibgeschwindigkeit

Model Nr.
Interface
Kapazität
Flash Typ
MTBF (Std.)
Standard Temperatur
Erweiterte Temperatur
Lesegeschwindigkeit
Schreibgeschwindigkeit

Model Nr.
Interface
Kapazität
Flash Typ
MTBF (Std.)
Standard Temperatur
Erweiterte Temperatur
Lesegeschwindigkeit
Schreibgeschwindigkeit

Model Nr.
Interface
Kapazität
Flash Typ
MTBF (Std.)
Standard Temperatur
Erweiterte Temperatur
Lesegeschwindigkeit
Schreibgeschwindigkeit

Model Nr.
Interface
Kapazität
Flash Typ
MTBF (Std.)
Standard Temperatur
Erweiterte Temperatur
Lesegeschwindigkeit
Schreibgeschwindigkeit


Diese Webseite verwendet Cookies. Mit der Nutzung unserer Dienste erklären Sie sich damit einverstanden, dass wir Cookies verwenden: Weitere Informationen